Arduino Nano Board
The Arduino Nano is a small, complete, and breadboard-friendly board based on the Atmel ATMega328 (Arduino Nano 3.0) or Atmel ATMega168 (Arduino Nano 2.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. The Nano was designed and is being produced by Gravitech.
If you want to take a closer look at this board we advise you to visit the official Arduino Nano Page here.
|Microcontroller||Atmel ATMega168 or Atmel ATMega328|
|Operating Voltage||(logic level) 5V|
|Input Voltage (recommended)||7-12V|
|Input Voltage (limits)||6-20V|
|Digital I/O Pins||14 (of which 6 provide PWM output)|
|Analogue Input Pins||8|
|DC Current per I/O Pin||40mA|
|Flash Memory||16KB (ATMega168) or 32KB (ATMega328) of which 2KB used by bootloader|
|SRAM||1KB (ATMega168) or 2KB (ATMega328)|
|EEPROM||512bytes (ATMega168) or 1KB (ATMega328)|
|Dimensions||18.6mm x 43.3mm|