Parallax BASIC Stamp BS2P24-IC Module
The BASIC Stamp BS2P24-IC has several advantages over all previous BASIC Stamps. It is 3 times faster than a BS2-IC and 20% faster than the BS2SX-IC. Commands for interfacing with parallel LCDs, I2C devices and Dallas Semiconductor One Wire parts have been added along with a polled interrupt capability. The BS2P24-IC is pin-compatible with other BS2 variants.
The BS2P24-IC may be easily programmed with one of our Carrier Boards and a Serial Cable. More information about these accessories may be found here.
The BS2P24-IC is also available in a Starter Kit which includes a Super Carrier Board, an AC Adapter and a Serial Cable; everything you need to get your project off to a flying start. More information about our BS2P24-IC Starter Kit may be found here.
|Package||24-pin DIP module|
|Size||3.0 L x 1.6 W x 0.9 H (cm)|
|Environment||0-70 °C (32-158 °F)|
|Processor Speed||20 MHz Turbo|
|Program Speed||~12,000 instructions/sec.|
|RAM||32 Bytes (6 I/O, 26 variable)|
|Scratch Pad RAM||128 Bytes (for interprogram sharing)|
|EEPROM (Program) Size||8x2K Bytes, ~4,000 instructions|
|Number of I/O Pins||16 + 2 Dedicated Serial|
|Voltage Requirements||5-15 VDC|
|Current Draw @ 5V||40 mA Run / 400µA Sleep|
|Source/Sink Current per I/O||30 mA / 30 mA|
|Source/Sink Current per unit||60 mA / 60 mA per 8 I/O pins|
|PC Programming Interface||Serial Port|